Unitech Hand Held Scanner User Manual

D.5
D.5 Scanner Port:
Enter Group 5 Group Default
0
1
2
3
4
5
6
7
8
9
Terminator:
0—Enter 1—Return (on digits keypad)
2
—Field Exit or Right Ctrl 3—None
D 1
Code ID: 0 – disable 1 – Enable
Note: This setting doesn’t affect EAN128 Code
ID. EAN128 has its own Code ID setting on page
D.7.
D 2
Define Code ID:
00–Code 39 Full ASCII
01–Code 39 Standard
02–EAN-13
03–UPC-A
04–EAN-8
05–UPC-E
06–Interleaved 2 of 5
07–Codabar
08–Code 128
09–Code 93
10–Standard 2 of 5
11–MSI Code
12– EAN128
13–Code32 (Italian
harmacy)
14-Delta Code
15–Label Code
16–Plessey Code
17– Code 11(Special)
18–China Postal code
(Toshiba Code)
D 3
Scan two digits to
choose a code, then
scan a char. From full
ASCII table to define
ID.
Double Verification:
0 – Off
1~7 – On(Verify 1~7 times)
D 4
Scanning Mode:
0 –Trigger 1– Flashing 2 –Multiscan
3–One Press One Scan 4 –Test Mode
5–Old Laser flash Mode 6 –Continuous
D 5
Label Type:
0 – Positive
1 – Positive and Negative
D 6
Aim function for long range laser engine:
0—Disable 1—Enable
Aiming Time: 2—0.5s, 3—1s
, 4—1.5s, 5—2s
D 7
Data Length (Two Digits) Send:
0—Disable 1—Enable
D8
Preamble Postamble
PP OO
Scan ‘PP\OO’ for Pre\Postamble. Scan characters
from Full ASCII char or Function
Exit

Unitech Hand Held Scanner Specifications

General

Brand	Unitech
Model	Hand Held Scanner
Category	Barcode Reader
Language	English