Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
16
Triggering Scanner Module
The HT630 can be used with a built-in laser scanner module to input data. The built-in
decoder reads most bar code labels. Users should keep the laser window clean to
prevent low reading rate of distorted bar code input signals.
Application Development Environment
The HT630 provides DOS functions and device drivers for application development,
including bar code decoding, keypad input, display output, serial input/output
communication, real-time clock access and power management control.
The HT630 can be programmed by the Windows-based JobGen Plus program
generation software or programmed by commonly used C compilers including
Microsoft C, Borland C and Turbo C. An executable program generated by JobGen
Plus or created by a compiler is downloaded to the HT630 and run on the unit.
JobGen Plus
JobGen Plus is a Windows-based program generator that gives users a
comprehensive terminal application development environment. With JobGen Plus,
users can design an application program for the HT630 by simply drawing the data
collection sequence on paper. The program requires minimal programming skills.
For more detailed programming information, please refer to the HT630 Programming
Reference Manual / JobGen Pro User’s Manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
