Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
28
Chapter 4
Built-in Application - FormCaching
Overview
The HT630’s system includes a built-in application called FormCaching. This
application allows users to create a data entry application by specifying a eld prompt,
type, length, input method, delimiter, etc., without having to write the program code
and load it to the terminal.
Specications of FormCaching
DATA FIELD DEFINITION: maximum eld number = 8
Category Range Description
1 FIELD PROMPT Max. 16 characters Set eld prompting
2 MIN/MAX DATA
LENGTH
1 - 32 Set minimum eld length and
maximum eld length
3 DATA TYPE 1. NUMERIC
2. ALPHANUM
Numeric data (0~9) or alphanumeric
data (20H~FCH)
4 DEVICE TYPE 1. KEY ONLY
2. SCAN ONLY
3. BOTH
Input by keypad only, bar code
scanning only, or both
To Next Page
Loading...
