Unitech HT630 Product Reference Guide

HT630 Product Reference Guide
1.8 Triggering Scanner Module
The HT630 can be used with a built-in integrated laser scanner module to input data. The built-in decoder
reads most barcode labels.
Users should keep laser window clean to prevent low reading rate of distorted bar code input signal.
1.9 Application Development Environment
The system of HT630 provides DOS functions and device drivers for application development, including bar
code decoding, keypad input, display output, serial input/output communication, real-time-clock access and
power management control.
The HT630 can be programmed by the high-level Windows-based JobGen Plus program generation
software or programmed by commonly used C compilers including Microsoft C, Borland C and Turbo C. An
executable program generated by JobGen Plus or created by a compiler is downloaded to the unit and run
on the unit.
JobGen Plus
The JobGen Plus is a Windows-based program generator that gives the user an ease-of-use and
comprehensive terminal application development environment. Through use-of-JobGen Plus, user can
design an application program for data collection terminal by simply drawing the data collection
sequence on paper, and thus, requires minimum programming skills.
For more detailed programming information, please refer to HT630 Programming Reference Manual,
JobGen Pro User's Manual.

Unitech HT630 Specifications

General

Display diagonal	- \
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
ROM capacity	0.256 MB
Internal memory	0.0005 GB
Internal memory type	RAM
Compatible memory cards	Not supported
Maximum internal memory	4.5 MB
Processor family	-
Processor frequency	0.8 GHz
Interface	RS-232
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	-20 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	120 mAh
Battery life (max)	12 h
Battery recharge time (off)	2.5 h
Certification	BSMI, CCC, CE, FCC, VCCI, RoHS
Product color	Blue
Barcode reader	Yes
Keyboard layout	Alphanumeric
Keypad number of keys	27

Weight and Dimensions

Depth	35.1 mm
Width	67.1 mm
Height	167.64 mm
Weight	243.81 g