Unitech MS120 - Setup Procedures

2
8 Symbologies(II): Code 128 /
MSI / Code 93 / Codabar /Label
Code ………….. 18
9 Symbologies(III): UPC/EAN
………….. 20
Function Code for PC .… 22
Function Code for MAC …. 24
Function Code for IBM Terminal
………..… 26
Full ASCII Table ………….. 28
Test Chart …………………... 34
Setup Procedures
1) Locate a group that contains the
parameters to be changed.
2) Scan the “Enter Group” label. The
Reader will sound 3 beeps to indicate
that setup is in progress.
3) Scan the label representing the
parameter to be changed.
4) Scan the labels representing the
parameter values.