3
5) Repeat the above two steps, if
necessary, to change the parameters in
the same group.
6) Scan the “Exit” label to end the
group currently selected. The Reader
will sound 2 beeps.
7) Repeat the procedure for other
groups, if needed, which include the
parameters to be changed.
Batch Setup
Having configured a scanner, you may
duplicate the settings of the scanner
(master) to the others. You can do this
by producing a set of custom setup
labels derived from the master scanner
and scanning these labels by other
scanners.
The following label is called “dump
settings” label. Scan that label, the
settings of a scanner will dump to the
screen as one or several ASCII
string(s). Printing the string(s) into bar
code labels in Code 39, you get the
batch setup labels to duplicate other
scanner.
Dump Settings
To Next Page
Loading...
Need help?
General
