Length Within Range - Select this option to decode a Code 128 symbol with a
specific length range. Select lengths using numeric bar codes in the appendix of
Numeric Bar Codes. For example, to decode Code 128 symbols containing
between 4 and 12 characters, first scan Code 128 – Length Within Range. Then
scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an
error or change the selection, scan the Cancel bar code.
Any Length - Select this option to decode Code 128 symbols containing any
number of characters within the decoder’s capability.
GS1-128 (formerly UCC/EAN-128)
Enable/Disable GS1-128
To enable or disable GS1-128, scan the appropriate bar code below.
51
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
To Next Page
Loading...
