-90- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
3.2.9.2 Code 128 Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description for additional information. Minimum and Maximum lengths
= 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
3.2.9.3 Code 128 Append
This function allows the scanner to append the data from several Code 128 bar
codes together before transmitting them to the host computer. When the
scanner encounters a Code 128 bar code with the append trigger character(s),
it buffers Code 128 bar codes until it reads a Code 128 bar code that does not
have the append trigger. The data is then transmitted in the order in which the
bar codes were read (FIFO). Default = On.
On*
Off
To Next Page
Loading...
