-9- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
1.5 Battery Charging
Before you use the MS852B Plus for the first time, we strongly
recommend charging the battery. It takes approximately 5 hours to fully charge
the battery. To charge the scanner with / without a cradle, please follow the
instructions below. Please only use the USB type C cable which came with the
package.
￭ Charging through USB type C cable
To charge MS852B Plus, please connect scanner with host PC through
USB type C cable.
￭ Charging with the cradle
Please charge your scanner with the cradle.
To Next Page
Loading...
Need help?
General
