- 134 - © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
3.3.18.2 Aztec Append
This function allows the scanner to append the data from several Aztec bar
codes together before transmitting them to the host computer. When the
scanner encounters an Aztec bar code with the append trigger character(s), it
buffers the number of Aztec bar codes determined by information encoded in
those bar codes. Once the proper number of codes is reached, the data is
output in the order specified in the bar codes. Default = On.
On *
Off
3.3.18.3 Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because
the bar code being scanned was created using a code page that is different
from the one the host program is expecting. If this is the case, scan the bar
code below, select the code page with which the barcodes were created (see
ISO 2022/ISO 646 Character Replacements), and scan the value and the
Save bar code from the Programming Chart.
The data characters should then appear properly.
Aztec Code Page
To Next Page
Loading...
Need help?
General
