-12- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
￭ Cradle LED indicator
Description Indication
Power is on but host is not connected Solid Red Light
Host is connected, BT is paired and
disconnected
Solid Green Light
System busy with data sending/receiving
disabled
Green LED toggling
every second
Host is connected, BT is connected and
cradle is ready to send/receive data
Solid Blue Light
BT in pairing mode
Blue LED toggling
every second
In cradle Firmware Update Mode White Light on
In scanner Firmware Update Mode
White LED toggling
every second
￭ Scanner Beeper indicator
Beeper Description Indication
Scanner in Auto Operation Mode Power On with 1 Beep
Scanner in Wedge Operation Mode Power On with 2 Beeps
Scanner in Batch Operation Mode Power On with 3 Beeps
Auto Power Off Alarm 3 short beeps at 15 seconds before power off
Power Off Short beep
Good Read with BT Connected Beep with medium sound
Good Read with BT Disconnected Beep with short medium-high sound
BT Connection Beep with low-medium-high sound
To Next Page
Loading...
Need help?
General
