-32- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
2.25.1 Scan Mode
Manual Trigger-Normal*
Normal mode offers good scan speed and the longest working ranges
(depth of field).
Presentation Mode
Presentation Mode uses ambient light and scan engine illumination to detect
bar codes. When in Presentation Mode, the LEDs remain dim until a bar
code is presented to the scan engine, then the aimer turns on and the LEDs
turn up to read the code. If the light level in the room is not high enough,
Presentation Mode may not work properly. Scan the following bar code to
program your scan engine for Presentation Mode.
2.25.2 Aimer Mode
This feature allows you to turn the aimer on and off. When the Interlaced bar
code is scanned, the aimer is interlaced with the illumination LEDs.
Default = Interlaced.
Aimer Mode*
Off
To Next Page
Loading...
Need help?
General
