Unitech PA500 - Scanner Settings

38
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
To exit Scan2Key:
1. On the Today screen, tap and hold the Scan2Key icon, then tap Exit on the pop-up menu. The
Quit Scan2Key dialog box appears.
2. Tap Yes.
Scanner Settings
When it is necessary to change the default barcode symbology for a different application, the Scanner
Control Panel provides the ability to change default symbology. The Scanner Control Panel also lets
you place delimiter characters behind scanned data and save the settings.
To view the default barcode symbologies:
1. Tap Start → Settings.
2. On the System tab, tap Scanner Settings.