EasyManuals Logo

Unitech PA500 User Manual

Unitech PA500
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Chapter 1 Getting Started
3
A Tour of the PA500
The following sections describe the main components and features of the PA500.
Front View
No. Component Description
1.
Barcode laser scanner
(optional)
Reads and captures information on a barcode label.
2.
Status indicator Indicates the battery charging and barcode scanning status.
Green - Battery is fully charged, the device is running on
battery power, or barcode scanning process is completed
without error.
Red - Battery is charging, barcode scanner is activated and
processing.
3.
SDIO/MMC slot Accepts an SD (Secure Digital), MMC (Multimedia Card) or SDIO
(Secure Digital Input Output) cards, allowing you to add more
memory.
Install add-on applications or use audio text files stored in it for
use with internal applications. You can also use it to backup data
from your device.
4.
Power button If the device is off, press this button to turn it on.
Alternatively, when the unit is on, this key must be pressed and
held down for about two seconds in order to turn the device off.
5.
LCD touch screen Displays the applications and data stored on your device. It is
touch-sensitive and responds to the stylus or finger.
6.
Keypad Includes a software keyboard button, navigation key and
application buttons to launch Microsoft Outlook Mobile programs.
7.
Microphone Inputs audio into your device when recording the voice notes.
8.
Left scanner trigger
key
Press to activate the barcode laser scanner.
9.
Cord holder Eyelet for holding the elastic bungee lanyard.

Table of Contents

Other manuals for Unitech PA500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unitech PA500 and is the answer not in the manual?

Unitech PA500 Specifications

System Memory IconSystem Memory
SDRAM64 MB
Flash ROM64 MB
Display IconDisplay
display resolution240x320 QVGA
display typeColor Transflective TFT
touch screenyes
Laser Bar Code Scanner IconLaser Bar Code Scanner
scan rate104 scans/sec ± 12 scans/sec
scan angle default47°±3°
scan angle reduced35°±3°
Power IconPower
main battery voltage3.7 V
main battery capacity2200 mAh
rechargeable time3.5 hours
Operating Environment IconOperating Environment
operating temperature32°F to 122°F (0°C to 50°C)
storage temperature-4°F to 140°F (-20°C to 60°C)
relative humidity5% ~ 95% (non-condensing)
Weight and Dimensions IconWeight and Dimensions
weight with battery and scan engineUnder 213 g
length126 mm
height23 mm

Related product manuals