Unitech PA500 User Manual

Unitech Electronics Co., Ltd Created
by Yukiko
PA500 Operation
Manual
V2.0 Page 100 of 123
Chapter 9 Bluetooth Settings
9.1 Bluetooth Connection – ActiveSync
A1 Check or define your host’s Bluetooth COM port
A1.1 If your host (PC or notebook) has built in Bluetooth function, turn it on (Or
Enable) the Bluetooth function.
A1.2 If your host (PC or notebook) does not have built in Bluetooth function,
please attach an external Bluetooth dongle at your host and install the driver.
A1.3 Your taskbar should have a Bluetooth icon.
A1.4 Right click this icon and select “Advanced configuration”. (As different
user might use different brand of Bluetooth dongle, please find this according to
your dongle’s manual)
A1.5 Select “Local Device Service” , check which COM port is applied to
Bluetooth. (Ex: COM5). If you want to change the COM port, you can click
“properties” and change it.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm