GO1 User Manual
2021 Unitree All Rights Reserved 28
APP Interface
UnitreeRobotics is an application tailored for quadruped robots of Unitree. Use of Android and IOS system
platforms; It supports touch screen and special joysticks, this section takes UnitreeRobotics APP as an example to
explain, the specific interface is subject to the corresponding platform display.
UnitreeRobotics APP 首页
You can experience the app through the following operations
The APP can realize the following functions:
1. It can simultaneously obtain the image transmission of the fisheye binocular camera and the use of AI human
body recognition
2. The robot walking and related functions can be controlled through the APP
3. The main control, power and other information of the robot can be obtained in real time
4. It can realize slam control robot
For related APP instructions, please refer to the "Go1 User Manual"
Notice:
The APP side cannot control the robot at the same time as the tag controller. If you need to use APP for
control, please turn off the tag controller in advance
To Next Page
Loading...
