Unitron uDirect 3 User Manual

4140
Using uDirect  with uMic
If you have a uMic, it works with uDirect  to
stream audio from a person or device to your
hearing aids.
Pairing uMic to uDirect 
. Starting with the uMic in the o position,
press and hold the volume up (
) button
and turn the uMic on. Continue to hold the
volume up (
) button until the blue audio
indicator starts to flash.
. Switch on uDirect  rst. Press the connect
(
) and volume up ( ) buttons at the
same time for two seconds.
. Aer successful pairing, the blue audio
power
audio
hearing aid wearer speaker
uMic
up to 20 meters
(65 ft)
uDirect 3
indicator on the uDirect  and uMic will stop
blinking.
Playing back audio from your uMic
. Clip the uMic to a person, or position it near
a sound source such as a speaker or TV.
. Adjust the volume level on the uMic to a
medium to high level.
. Make minor volume adjustments with the
uDirect  volume buttons (
).
Pausing playback
If you want to temporarily stop streaming, press
the (
) button to pause the streaming. Press
the (
) button again to resume streaming.
Stopping playback
To stop playback on your device and switch
back to regular hearing programs, press and
hold the access (
) button for two seconds.
Changing hearing aid programs is not possible
while streaming.
Please contact your hearing healthcare
professional if you can not complete the pairing
procedure with the steps described.

Unitron uDirect 3 Specifications

General

Brand	Unitron
Model	uDirect 3
Category	Hearing Aid
Language	English