Unitron uDirect 3 - Managing Multiple Audio Inputs to the Udirect 3

4948
for  seconds, and then every  minutes
thereaer.
If there is no FM signal for more than 
minutes, the notication tone restarts as soon
as the FM signal is detected again.
To deactivate FM completely, unplug the FM
receiver from the uDirect .
Managing multiple audio inputs to the
uDirect 
When an audio source
is connected via the
uDirect , your hearing
aids will automatically
switch to special
programs.
It is possible to have multiple audio sources
connected and in operation with the uDirect :
• Two Bluetooth devices (e.g., phone and
uTV)
• One audio input (. mm audio plug)
• One direct audio input (Europlug)
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as “connected”
to the uDirect  if:
• The audio plug is inserted (with or without
audio signal)
Previously-active
hearing program
3.5 mm plug
(audio jack)
FM
Europlug
Bluetooth
music 1
Bluetooth
music 2