Unitronics Vision V130-J Series - RTD and Output Wiring Diagrams; RTD Input Wiring and Output Wiring

Vision™PLC+HMI
Unitronics
11
RTD
▪ PT100 (Sensor 0): use Input 9 and 10, related to CM signal.
▪ PT100 (Sensor 1): use Input 7 and 8, related to CM signal.
▪ 4 wire PT100 can be used by leaving one of the sensor leads unconnected.
Analog Outputs
npn Outputs (TRA22)
Relay Outputs
RA22
TRA22