The Technical Stuff
__________________________________________________________
-
Maintenance Information
Fuse
There is no user accessible fuse for the 710. It contains an internal power supply circuit board with its
own fuse.
Voltage Select
The 710 contains a universal auto-sensing, filtered, multi-stage regulated power supply which
supports 100-240VAC and 50-60Hz power for trouble-free operation worldwide. No switch setting is
required when changing from 115 to 230 volt use or vice versa.
The 710 contains no user-serviceable parts.
Repair should be performed only by qualified
service personnel.
-
-
To Next Page
Loading...
