Specifications
_______________________________________________________________________
- 22 -
Microphone Input Impedance 2k
Balanced Line Input Impedance 10k
Hi-Z Input Impedance 2.2M
Internal Output Impedance 600
Overall Gain Range -Infinity to 70dBu
Gain Pot Range
Mic +10 ~ +60 dBu
Line - 10 ~ +40 dBu
Hi-Z +10 ~ +40 dBu
Maximum Mic Input Level Gain @min
SS 1% THD +18 dBu
Tube 1% THD - 7 dBu (+8dBu with pad)
Maximum Line Input Level Gain @min
SS 1% THD +30 dBu
Tube 1% THD + 8 dBu
Maximum Hi-Z Input Level Gain @min
SS 1% THD +18 dBu
Tube 1% THD + 8 dBu
Clipping Level (Tube and Solid-State) same as Max In
Maximum Output Level into 600 +18 dBu into 600, +28 dBu into 100k
Frequency Response (Mic/Line/Hi-Z) 20Hz to 100kHz +/- 0.2 dBu
Min THD+Noise @ +4dBU 0.1% tube, 0.005% solid-state
External Connections XLR Line in/out, XLR Mic in, 1/4" (Hi-Z) in
Low Cut Filter 75Hz, Bessel
Pad -15dB
Meter Drive (THD) and Output (dB)
Tube Complement One 12AX7
Power Requirements 100V - 240V, auto-sensing power supply
Maximum Power Consumption 160mA @120VAC, 20W
Power Connector Detachable IEC power cable
Dimensions 1/2 rack, 2U (8.45W x 3.5H x 10.25D)
Weight 5.25 lb
To Next Page
Loading...
