Universal Remote Control URC-L-1870 User Manual

……………………………………………………………………………………………………
14
S E T 3 S
Remark:
You can fix all more than one device code and these device codes can’t be
changed by neither Auto Search nor Brand Code Set up.
D. Background Light
If the background light is on, the background light will be lighted up for a while after you
press any key.
1 Press and hold the
key for more than 3 seconds, and then release it.
2 Press the
or key to select the “CONFIGURE”, and then press
the
key.
3 Press the
or key to select the “LIGHT ”, and then press the
key.
4 Press the
or key to change to the “ON” or “OFF” mode.
5 Press the
key to save setting and LCD shows SUCCESS then “LIGHT” exit
to current setup state. You can press any device key to finish set up or press the
key to last state, or you can use or to select other set up.
E. Contrast Adjust
If you are not satisfied the LCD screen contrast of your remote control, you can use
below steps to change it.
1 Press and hold the
key for more than 3 seconds, then release it.
2 Press the
or key to select the “CONFIGURE”, then press the
key.
3 Press the
or key to select the “CONTRAST”, then press the
C O D E S E T U P
T V 0 1 0
1 1 : 4 5
C O N F I G U R E
D E V L O C KT I M E S E T U P
T V O F F
T V O N
S U C C E S S

Universal Remote Control URC-L-1870 Specifications

General

Brand	Universal Remote Control
Model	URC-L-1870
Category	Universal Remote
Language	English