Universal Remote Control URC-L-1870 User Manual

……………………………………………………………………………………………………
18
number, e.g.005 (you can find them in the BRAND CODE LIST at the attachment of
this manual book) of the device brand by number button.
3. Please press the
key to save it and exit, LCD shows “SUCCESS”. then return
to current setup.
4. Now you can press
key to check, it must be set up to VCR code 005. You can
press any device key to finish Device Alternation or press the key to last state,
and use
or to select other set up.
SET 3S
VCR
Input the code no. 005
Clear All
Erase all the setting up data, and go back to the factory default settings.
1. Press and hold the
key for more than 3 seconds, and then release it.
2. Press the
or key to select the “CONFIGURE”, and then press
the
key.
3. Press the or key to select the “CLEAR ALL”, and then press the
key and LCD shows SURE CLEAR.
4. Then press the
key to clear all settings and go back to original factory
default settings.
T V 0 1 0
1 1 : 4 5 A M
D E V S E A R C HC O D E S E T U P
C O D E S H I F T
V C R 0 1 8
T V 0 1 0
S U C C E S S
V C R 0 0 5
1 1 : 4 5 A M
V C R 0 1 8
1 1 : 4 5 A M

Universal Remote Control URC-L-1870 Specifications

General

Brand	Universal Remote Control
Model	URC-L-1870
Category	Universal Remote
Language	English