Universal Remote Control URC-L-1870 User Manual

……………………………………………………………………………………………………
6
Direct Set Up (by Brand and Code)
This revolutionary method lets you directly choose the brand and code in LCD screen,
simply set up your remote control even without manual book.
1.Turn on the device (e.g. your television set) you would like to operate. If it is a VCR,
please insert a tape.
2.Press and hold the
key on your remote control. Then press (simultaneously)
a desired device keys (e.g.
)
3.Then release them, the brand will be displayed on the screen.
4.Press the
or key to select the brand of your device (e.g. your TV
brand: Philips)
5.Check the function of the keys. If none of the keys of your new remote control can
work, or most of the keys work improperly, please try other code by the
or
key to choose, until all basic functions operated properly.
6.If you are satisfied with the code, just press the
key to save it. LCD shows
“SUCCESS” and then finishes the set up.
SET+TV
i f s a t i s f i e d , p r e s s O K
Remark:
1. To terminate set up, please press .any device (e.g.
) key or key.
2. You must point your remote control to the device that you want to control when
you test the keys.
3.
, only used to program your new remote control
during set up. You can’t control your device as normal menu function at this
moment until you finish set up.
4. If the device is locked, you must first unlock the device then set up.
Set-up by Auto Search
In case of the set-up by Brand and Code failed or you can’t find the brand name in
your remote control screen, you may use the Auto Search to find the correct code to
operate your device.
1. Turn on the device (e.g. television) you would like to operate. If it is a VCR,
please insert a tape.
T V
1 0 : 4 5 A M
P H I L I P S
0 0 1
A C C E N T
023
S U C C E S S
P H I L I P S
0 1 6
T V 0 1 6
1 1 : 4 5 A M

Universal Remote Control URC-L-1870 Specifications

General

Brand	Universal Remote Control
Model	URC-L-1870
Category	Universal Remote
Language	English