Universal Remote Control URC-L-1870 User Manual

……………………………………………………………………………………………………
17
I. Delete Macro
1. Press and hold the key for more than 3 seconds, then release it.
2. Press the
or key to select the “MACRO”, then press the key.
3. Press the
or key to select the “MACR O1”, then press the key.
LCD shows “SET UP”
4. Press the
or key to select the “DELETE ”, and then press the
key.
5.LCD shows “SURE DELETE”, Press the
key to confirm to delete and the LCD
display shows “SUCCESS” then goes back to the last state.
6.You can press any device key to finish the delete operation or press the
key to
last state, and use
or to select other set up.
SET 3S
J. Device Alternation
URC20-F15D has a flexible device definition for key. If you want operate second
VCR (or second TV, SAT/CBL, CD... etc.), you can set up it’s code to AUX device key
for a device alteration (CODE SHIFT). Just follow the steps below:
1. Press and hold the
key for more than 3 seconds, then release it. Press the
or keys to select to “CODE SETUP”, and press the key.
2. The LCD screen shows the “DEV SEAR CH”, Press the or keys to
select “CODE SHIFT”, and press the
key. Then you press device key (e.g.
VCR key) for your desired operation device, then press
. And then enter the code
M A C R O
T V 0 1 0
1 1 : 4 5 A M
C O D E S E T U P
M A C R O 1 S E T U P
D E L E T E
SURE DELET
S U C C E S S

Universal Remote Control URC-L-1870 Specifications

General

Brand	Universal Remote Control
Model	URC-L-1870
Category	Universal Remote
Language	English