Universal Robots UR10e Hardware Manual

IEC 60664-1
IEC 60664-5
Insulation coordination for equipment within low-voltage systems
Part 1: Principles, requirements and tests
Part 5: Comprehensive method for determining clearances and creepage distances equal to or less
than 2 mm
EUROMAP 67:2015, V1.11
Electrical Interface between Injection Molding Machine and Handling Device / Robot
The E67 accessory module to interface, that interfaces with injection molding machines, complies
with this standard.
Hardware Manual 83 UR5e
13.Applied Standards
Copyright © 2009–2022 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR10e Specifications

General

Brand	Universal Robots
Model	UR10e
Category	Robotics
Language	English