Universal Robots UR3e

2.Handling ESD-Sensitive Parts
To prevent damage to ESD-sensitive parts i.e. Printed Circuit Board, follow the instructions below in
addition to all the usual precautions, such as turning off the power before removing the circuit
boards. See section Complete Rebooting Sequence
NOTICE
Be sure you have intact ESD Wristband and a spare ESD bag before replacing any
ESD-sensitive parts.
e-Series 4 Service Manual
2.Handling ESD-Sensitive Parts
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.