7.
REPLACEMENT OF THE DOOR GLASSES
7.1 WARNING
The internal glass of the door is a low emissive tempered
glass.
The glass surface towards the cooking chamber is cov-
ered by a transparent metallic film that reduces the heat
transfer to the interspace between the two glasses and
reflects the heat inside the chamber.
If you need to replace the internal glass, pay attention
to correctly place the glass with the low emissive side
towards the cooking chamber.
If the low emissive side is wrongly turned towards the
outside, the temperature of the external door surface will
rise with risk of burns for the user and possible blowing
of the glass!
To check the low emissive side you need to use a proper
tester set at a maximum range of
2 KOhm. Point the two test prods on the glass surface at
5 cm one from the other: the low emissive surface will
show around 50 Ohm of resistance, while the other side
will show infinite resistance.
8. OVENS STACKING
In the event of stacking multiple ovens it is essential
to assemble the UNOX stacking kit, code XC680 for
ChefTop™ - XC681 for BakerTop™, which will main-
tain the correct distance between the ovens.
C. CERTIFICATIONS
Producer: UNOX S.p.A.
Address: Via Dell’Artigianato 28/30
I-35010 Vigodarzere, Padova, Italy
Product: Mixed steam convection oven for profession-
al use
Family: ChefTop™ - BakerTop™
REFERENCE LAWS
The “CE” marking on the appliances indicated in this
manual refers to following UE directives:
ELECTRIC MIXED STEAM CONVECTION OVENS
XVC - XBC SERIES:
Low Voltage Directive 2006/95/EC
following the rules:
EN 60335-2-42:2003
EN 60335-1:2002; A11; A1; A12 ; A2 including pos-
sible listed national conditions/deviations for Norway
Electromagnetic Compatibility Directive 2004/108/EC
following the rules:
EN 55014-1:2000; A1; A2
EN 61000-3-2:2000; A2
EN 61000-3-3:1995; A1; A2
EN 61000-3-11:2000
EN 55014-2:1997; A1
EN 50366:2003 ; A1
DATA PLATE
•
•
•
•
•
•
•
•
•
21
ENGLISH
ChefTop™ - BakerTop™
To Next Page
Loading...
Need help?
General
