25
FAN CONTROL SWITCH
l For automatic control of the fan, set the Fan ON/AUTO switch to the AUTO position. In cooling, the fan
starts/stops with the cooling equipment. In heating, the fan is controlled by the heating equipment and
usually starts a few minutes after the heating equipment turns on.
l To turn on the fan manually, set the Fan ON/AUTO switch to the ON position, the fan will run continuously
to improve air ventilation. To return to automatic control, set the switch to the AUTO position.
HEAT/COOL CONTROL SWITCH
l If this switch is on the OFF position, both the heating and cooling systems are turned off,
and all programs and settings will be disabled.
l Slide the switch to HEAT or COOL to control the heating or air-conditioning system.
l will display when the switch is on the HEAT position, and will flash when heating is activated.
l will display when the switch is on the COOL position, and will flash when cooling is activated.
To Next Page
Loading...
