EasyManua.ls Logo

UPM THM301A - Troubleshooting Guide; Display and Battery Troubleshooting; Air-Conditioning Troubleshooting

UPM THM301A
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
Battery symbol ( ) is flashing.
Buzzer beeping.
Display will not come on.
Air-conditioning will not come on
(COOL symbol not flashing).
1) Check if the batteries are installed correctly.
2) Check if the batteries are fresh and the correct size.
3) Press the RESET button.
1) Batteries are low. Replace with fresh batteries.
1) System switch is on the HEAT or OFF position.
2) Current temperature is lower than set temperature. Check current program.
3) Air-conditioning has been turned off within 5 minutes, and automatic delay has been activated to
protect the compressor.
Air-conditioning will not come on
(COOL symbol flashing).
1) Check if the air-conditioning main switch is turned on;
it may have been turned off.

Related product manuals