Utax P-4030i MFP

9-13
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
User Account Lockout Setting
Configure these settings to restrict the operation for the user being authenticated.
1
Display the screen.
1 Press the [System Menu/Counter] key.
2 Press [ ] and then [User Login/Job Accounting].
3 Press [User Login Setting], [ ] and then [User Account Lockout Settings].
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
System Menu/Counter.
System Menu
Favorites/Application
10:10
Internet
Address Book/One Touch
User Login/Job Accounting
4/5
Close
2
1
Model Name Login User Name Login Password
P-4030i MFP/P-4035i
MFP
4000 4000
P-5035i MFP 5000 5000
P-6035i MFP 6000 6000