10-11
Troubleshooting > Troubleshooting
Copies have a moire pattern
(dots grouped together in
patterns and not aligned
uniformly).
Is the original a printed photograph? Set the original image to [Photo]. page 6-11
Texts are not clearly printed. Did you choose appropriate image
quality for the original?
Select appropriate image quality. page 6-11
Black or color dots appear on
the white background when
white original is scanned.
Is the inside of the document processor
or the glass platen dirty?
Clean the inside of the document
processor or the glass platen.
page 10-2
Printouts have vertical lines.
Is the slit glass dirty? Clean the slit glass. page 10-2
Printouts are fuzzy. Is the machine being used in conditions
of very humid, or humidity or
temperature rapidly changes?
Use in an environment that has suitable
humidity.
―
― Run [Drum Refresh]. page 10-25
Images are skewed. Are the originals loaded correctly?
When placing originals on the platen, align
them with the original size indicator plates.
page 5-2
When placing originals in the document
processor, align the original width guides
securely before placing the originals.
page 5-3
Is the paper loaded correctly? Check the position of the paper width
guides.
page 3-14
page 3-18
Paper often jams. Is the paper loaded correctly? Load the paper correctly. page 3-14
page 3-18
Is the paper of the supported type? Is it
in good condition?
Remove the paper, turn it over, and
reload it.
page 3-14
Is the paper curled, folded or wrinkled? Replace the paper with new paper. page 3-14
Are there any loose scraps or jammed
paper in the machine?
Remove any jammed paper. page 10-26
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
Need help?
General
Weight and Dimensions
