5-7
Operation on the Machine > Program
2
Register the program.
Press the one of the [Program I] to [Program IV] keys where you want to register the settings
and hold it (2 seconds or more).
The current settings are registered to the selected program key.
Confirming the Registered Program
The settings of the registered program can be confirmed by recalling the program.
Recalling Program (page 5-7)
Recalling Program
Select the one of the [Program I] to [Program IV] keys where the settings you want to recall are registered. The current
settings of various functions are replaced with the registered settings.
Place the originals and press the [Start] key.
To Next Page
Loading...
