Utax P-C3065

8-29
Setup and Registration (System Menu) > System Menu
Secure Protocol
LAN Interface
Ping
Restart Network
Optional Network
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Optional Network] >
[OK] key
Configure settings for the optional Network Interface Kit.
Item Description
SSL Select whether or not to use SSL.
Value: Off, On
IPP Security Select the IPP security level. This setup is available when SSL is [On].
Value: IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].
Value: HTTP/HTTPS, HTTPS only
SMTP Security Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 1 Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 2
POP3 Security 3
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Ping Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
NOTE
If [NW InterfaceSend] is set to [Option NIC], this item is not displayed.
Item Description
Restart Network Restarts the network.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.