10-31
Troubleshooting > Troubleshooting
2 Select the [ā] or [āŗ] key to change the H-L, V, and H-R items, select the [ā²] or [ā¼] key to
enter the values read from the chart, and select the [OK] key.
Magenta correction is performed. After a brief interval, you will return to the standard menu for color
printing position correction.
To increase the value from 0 up to a maximum of 9, select the [ā²] key. To decrease the value, select
the [ā¼] key.
Select [ā¼] to change the value from 0 to an alphabetical letter. Continue selecting to change from A
through l. To move in the opposite direction, select [ā²].
You cannot use the numeric keys to enter these values.
3 Repeat steps 3 to 4 to correct cyan and yellow.
To Next Page
Loading...
Need help?
General
