11-10
Appendix > Optional Equipment
6 Select [Yes].
Checking Details of Application
Use the procedure below to check the details of application.
1 [System Menu/Counter] key > [ā²] [ā¼] key > [System/Network] > [OK] key
2 [ā²] [ā¼] key > [Op Functions] > [OK] key
3 Select the desired application, and select [Menu].
4 [ā²] [ā¼] key > [Detail] > [OK] key
You can view detailed information on the selected application. Select the [āŗ] key to view the next
screen. Select the [ā] key to return to the previous screen.
The table below lists the item you can view.
Extend the trial period.
[ā] [āŗ] key > [Date of Trial] > [Extend] > [Yes]
The trial period is extended.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000
Item
Function Name
License On
Trial Counts
Date of Trial
Status
To Next Page
Loading...
Need help?
General
