4-62 Using the Operation Panel
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter
size page (80 characters at 10 pitch). This setting is only effective in PCL
6 emulation.
1 In the Page Setting menu, press or to select Wide A4.
2 Press [OK]. The Wide A4 screen appears.
3 Press or to select whether Wide A4 mode is enabled.
4 Press [OK]. The wide mode setting is set and the Page Setting menu
reappears.
XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable
area during printing.
1 In the Page Setting menu, press or to select XPS FitTo Page.
2 Press [OK]. The XPS FitTo Page screen appears.
3 Press or to select whether XPS FitTo Page mode is enabled.
4 Press [OK]. The XPS FitTo Page setting is set and the Page Setting
menu reappears.
To Next Page
Loading...
Need help?
General
