Utax P-C3570DN - Page 154

Using the Operation Panel 4-81
Date Format (date format selection)
One of three formats can be selected for the date format.
1 In the Date Setting menu, press  or  to select Date Format.
2 Press [OK]. The Date Format screen appears.
3 Press  or  to select the desired date format.
The following date formats can be selected:
Month/Day/Year
Day/Month/Year
Year/Month/Day
4 Press [OK]. The date format is set and the Date Setting menu
reappears.
Time Zone (time difference setting)
Set the time difference from GMT.
1 In the Date Setting menu, press  or  to select Time Zone.
2 Press [OK]. The Time Zone screen appears.
3 Press  or  to select the location.
4 Press [OK]. The time zone is set and the Date Setting menu
reappears.
Summer Time (summer time setting)
Set summer time.
1 In the Date Setting menu, press  or  to select Summer Time.
2 Press [OK]. The Summer Time screen appears.
3 Press  or  to select whether the summer time is enabled.
Date Format: a b
1 *Month/Day/Year
2 Day/Month/Year
3 Year/Month/Day
Time Zone: a b
@ -05:00 Bogota
[ -05:00 Estn Time
\ -04:30 Caracas
Note If you select a region that does not utilize summer time, the
summer time setting will not appear.
Summer Time: a b
1 *Off
2 On