Floor Screed Machine HD 50 33
www.utiform.com departamento.técnico@utiform.com Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
The fuel and air tanks have bleeding caps the same as those corresponding to the diesel motor housing.
8.2 Coupling
The system is coupled directly to the diesel motor.
8.3 Compressor
The compressor housing contains two rotors, screw type with an asymmetric profile, manufactured with
machine tools to guarantee high precision, which together with the strictest quality controls, and provides high
volumetric performance.
8.4 Construction details of the compressor
Figure 2 Diagram of Rotary Compressor Operation
1
.- ASPIRATION 2.- COMPRESSION
3.- COMPRESSION 4.- DISCHARGE
Figure 1 Transversal section of a screw compressor
1.- Drive axle
2.- Radial bearing
3.- Male rotor
4.- Back cover
5.- Axle bearing
6.- Housing
7.- Front cover
To Next Page
Loading...