Floor Screed Machine HD 50 35
www.utiform.com departamento.técnico@utiform.com Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
8.5 Operating diagram
A
: Oil conduct
ARF: Low grain size material non-return
C: Compressor
CA: Aspiration cylinder
D: Tank
FA: Aspiration filter
FC: Oil filter
FR: Oil filter regulation
FS: Filter separator
IF: Low grain size material injection
IP: Principal injection
M Diesel motor
OA: Aspiration Equipment
OC1, OC2, OC3: Calibrated openings
P: Motor oil pressure stat
PT: Working pressure gauge
R1, R2, R3, R4, R5: Regulation channels
R6, R7: Motor cooling fluid conduits
RACC: Compressor oil cooler
RACM: Motor oil cooler
RP: Proportional regulator
T: Thermocouple motor oil temperature
T: Thermocouple compressor mix temperature
TF: Return low grain size material pipe
TP: Oil filling cap
VN: Pneumatic discharge valve
VPM: Minimum pressure valve
VR: Safety valve
VT: Fan
VV: Speed Variator
To Next Page
Loading...