EasyManua.ls Logo

Utilitech 148013 - User Manual

Utilitech 148013
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
JET PUMP &
TANK SYSTEM
ITEM #0955552
MODEL #148013
Español p. 19
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-994-4148, 7:30 a.m. - 5:00 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
JW1801
1
025212 B

Table of Contents

Questions and Answers

  • J
    Jennifer MontgomeryAug 5, 2025
    What to do if my Utilitech 148013 Water Pump will not deliver water or develop pressure?
    • R
      Robert RodriguezAug 5, 2025
      If your Utilitech Water Pump isn't delivering water or developing pressure, there might be several reasons. First, ensure the pump casing is filled with priming water. Second, check for leaks in the suction line and repair or replace if necessary. Third, if the discharge line is closed, open the ball valve and some outlets or faucets to allow air to escape. Also, make sure the suction line or valve isn't closed; if it is, open it. Lastly, a leaking foot valve should be replaced, and a clogged suction screen needs cleaning or replacement.
  • J
    juliewilsonAug 11, 2025
    How to fix a Utilitech Water Pump with little or no discharge?
    • N
      Nancy SmithAug 12, 2025
      If your Utilitech Water Pump has little to no discharge, several factors could be responsible. Ensure the pump casing is initially filled with water. If the suction lift is too high or too long, move the pump closer to the water source. Repair any holes or air leaks in the suction line, using pipe tape and sealing compound. Check that the foot valve is appropriately sized for the piping, or install one size larger. Ensure the foot valve or suction line is submerged adequately in the water. Verify the motor wiring is correct by checking the wiring diagram. Replace a leaking casing gasket. Finally, make sure the suction or discharge line valves are open.
  • D
    Dalton FriedmanAug 19, 2025
    Why is my Utilitech 148013 losing suction?
    • A
      andrewhunterSep 12, 2025
      If your Utilitech Water Pump experiences a loss of suction, it could be due to a few reasons. Check for air leaks in the suction line and repair or replace any faulty sections. If the suction lift is too high, try moving the pump closer to the water source. Also, inspect the foot valve or strainer for clogs and unclog if necessary.
  • E
    Edward SilvaAug 28, 2025
    What to do if my Utilitech Water Pump will not start or run?
    • J
      Jamie HollowayAug 28, 2025
      If your Utilitech Water Pump will not start or run, there are several potential causes. Begin by checking the wiring diagram on the motor to ensure it's wired correctly. Replace any blown fuses or close any open circuit breakers. Inspect all wiring connections for loose or broken wires. If there's a stone or foreign object lodged in the impeller, disassemble the pump and remove it. If the thermal overload has opened the circuit, allow the unit to cool down before restarting, after identifying the reason for the overload.

Summary

Product Specifications and Safety Information

Power Supply and Operating Parameters

Details voltage, frequency, temperature, connections, motor duty, and pressure switch settings.

DANGER: Electrical Shock Hazards

Critical warnings about fatal electrical shock risks during operation or maintenance.

WARNING: Electrical Safety and Chemical Alerts

Advisories on wiring, cord safety, and California chemical warnings.

Cautionary Advisories

Product Damage Risks

Situations and practices that can lead to product damage, including operational limitations.

Injury Risks

Warnings regarding potential physical harm from operating the equipment.

Package Contents and Preparation

Included Parts and Hardware

Lists the main components (pump/tank, hoses, tee) and hardware (gasket) included in the package.

Installation Time and Required Tools

Estimates installation duration and lists necessary tools and parts not included.

Typical Pump Setup

Describes the setup for shallow well jet pumps and their application limits.

General Pump Operation and Installation

Environmental Considerations

Guidelines for ventilation, drainage, and protection against freezing to maintain pump health.

Water Source and Suction Guidelines

Requirements for water supply and specifications for suction lift and horizontal distance.

Piping and Wiring Specifications

Recommendations for pipe/fittings materials and wire size selection for pump connection.

Well to Pump Connection

Suction Pipe Assembly Steps

Detailed instructions for connecting the suction pipe, including adapter, foot valve, and pipe.

Tank Pressure Check and Discharge Connection

Tank Pressure Adjustment

Steps to check and adjust the tank pressure using a gauge to the recommended 18 psi.

Discharge Pipe Assembly

Instructions for connecting the discharge pipe from the pump to the house plumbing.

Pump Electrical Connections

Electrical Safety and Wiring Guidelines

Critical safety warnings and advice on wiring, cord care, grounding, and professional installation.

Wiring the Pressure Switch

Pressure Switch Configuration

Instructions for changing voltage settings and connecting the pressure switch to the motor.

Pump Priming and Startup

Priming Procedure

Detailed steps for filling the pump and suction pipe with water before initial operation.

Care, Maintenance, and Troubleshooting

Winterizing Procedure

Instructions for draining the pump and tank system to prevent freezing damage.

Common Pump Problems and Solutions

Lists common issues like low discharge, no pressure, loss of suction, noise, and failure to start, with corrective actions.

Warranty Information

Warranty Terms and Exclusions

Details the one-year warranty period, exclusions, limitations, and consumer rights.

Replacement Parts List

Available Replacement Parts

Lists part numbers for O-rings, Venturi kit, repair kit, and pressure switch.

Utilitech 148013 Specifications

General IconGeneral
Horse Power0.5 HP
Maximum Feet of Head25 ft
Power Cord Length6 ft
Voltage115 V
Discharge Pipe Size1.25 in
Max Flow Rate3600 GPH
Inlet/Outlet Size1.25 in

Related product manuals