10
Lowes.com
9. Install a circular duct (not included) and secure it
with duct tape or clamps (neither included).
Finish ceiling work. Ceiling hole should be ush
with the edge of the ange. (DO NOT FLUSH
MOUNT TO JOIST. Flange should be ush
with ceiling board.) See dimensions for ceiling
hole on page 5. If joist is present, insert long
wood screws through ange and through ceiling
to secure fan to joist.
10. Attach plug connector to receptacle.
11. Install two (2) GU24, 13 watt bulbs (F).
12. Pinch mounting springs on grille (B) and insert
into narrow rectangular slots inside the fan
housing next to the fan motor.
Turn on electricity at breaker box after nishing
installation.
9
10
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
6
7
To Next Page
Loading...
