Utilitech 7113-01-L User Manual

7
Lowes.com
5. Install a circular duct (not included) and secure it
with duct tape or clamps (neither included).
Finish ceiling work. Ceiling hole should be ush
with the edge of the ange. (DO NOT FLUSH
MOUNT TO JOIST. Flange should be ush with
ceiling board.) See dimensions for ceiling hole on
page 5. If joist is present, insert long wood screws
through ange and through ceiling to secure fan to
joist.
6. Attach plug connector to receptacle.
7. Install two (2) GU24, 13 watt bulbs (F).
8. Pinch mounting springs on grille (B) and insert
into narrow rectangular slots inside the fan
housing next to the fan motor.
Turn on electricity at breaker box after nishing
installation.
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
5
8
6
7

Utilitech 7113-01-L Specifications

General

Brand	Utilitech
Model	7113-01-L
Category	Fan
Language	English