9
II System and operation
UWATEC
®
Smart dive computers
2.2 SmartTRAK
With SmartTRAK you can transfer dive data to a personal computer and graphically display the data.
The following settings may be changed with SmartTRAK:
• Unit system metric/imperial
• Audible attention signal suppression selective
• Gauge mode on / off
• Depth alarm 5 - 100 m (20 - 330 feet)
• Backlight illumination duration 2-12 sec.
• Maximum partial pressure of oxygen (ppO
2 max
) 1-1.95 bar
• Time limit to reset the O
2
% mix to air no reset / 1 - 48 hrs.
• Minimum reserve pressure at the end
of the dive (basis for RBT calculation) 20 – 120 bar (300 - 1750 psi)
• Tank pressure alarm 50 - 200 bar (750 - 2900 psi)
• Workload sensitivity 25 steps
The following data may be recalled with SmartTRAK:
• Number of past dives
• Total duration of past dives
• Atmospheric pressure
• Pairing information
• Dive profile
• Logbook
• Temperature curve
• Workload curve
• Alarms and attention messages
II
English
To Next Page
Loading...
Need help?
General
