The weight unit used before power off would be employed
when the indicator is turned on again.
5.4 TURN BACKLIGHT (OPTIONAL) ON/OFF
Press MODE to shift among various weight units with or
without backlight.
Even though the backlight function is employed,
backlight will be automatically turned off when a stable
weight remained for 25 seconds or a zero weight is
detected and remains stable for 10 seconds
Backlight will be automatically turned on again when
a new weight is detected or when any key is pressed.
5.5 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED
By pressing ZERO, weight displayed will be set to zero
and ZERO INDICATOR appears.
Refer to SPECIFICATIONS for maximum zero range.
5.6 TARE OFF THE WEIGHT OF A CONTAINER
When a container is used, follow the below steps to tare
off the weight of the container and get the net weight.
To Next Page
Loading...
