a. Scale is off
b. Press and hold TARE, then press ON/ZERO
c. Scale displays F1
d. Press TARE thirteen times
e. Scale displays F15
f. Press MODE to enter data and time setting
Make sure that the UTP printer is connected to scale
and it is in online status.
Key Function
MR = move cursor to the right
M+ = increase numeric value
Sequently set y=xx for last 2 digits of year
m=xx for month d=xx for day
Once date is set, press MODE to set time.
H=xx for hour m=xx for minute
Once time is set, press MODE to confirm.
***F19 ~ F21 functions are reserved for verification
Use.
To Next Page
Loading...
