Function
This scale is equipped with total print enabled/disabled
when performing memory-clear function. When total print
is disabled, press MR & TARE will only perform
memory-clear function, it won’t print out data of total.
a. Scale is off
b. Press and hold TARE, then press ON/ZERO
c. Scale displays F1
d. Press TARE twelve times
e. Scale displays F14
f. Press MODE to select between tt_on or tt_oF
-To enable Total Print when Performing Memory-clear
Function, press TARE when tt_on appears
-To disable Total Print when Performing
Memory-clear Function, press TARE when tt_oF
appears
g. After TARE is pressed, scale display F15
h. Press MODE to enter next set up or ON/ZERO to restart
the scale
4.2.12 Set and Send Date & Time Data to UTP
To Next Page
Loading...
