NOTE:
To comply with the law of certain countries and certain
approval requirements, the avoirdupois weight units may
be disabled. Contact your dealer for more information.
5.4 TURN BACKLIGHT (OPTIONAL) ON/OFF
Follow the below steps to turn on and off backlight (if
purchased).
a. Scale is on
b. Press and hold ON/ZERO until backlight is activated;
or press MODE to shift between metric and avoirdupois
weight to turn on and off backlight
Even though the backlight function is employed,
backlight will be automatically turned off when a stable
weight remained for 25 seconds or a zero weight is
detected and remains stable for 10 seconds
Backlight will be automatically turned on again when
a new weight is detected or when any key is pressed.
5.5 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED
By pressing ON/ZERO, weight displayed will be set to
zero and ZERO INDICATOR appears.
To Next Page
Loading...
