UWE APS - Page 25

transaction to memory
c. Indicator displays “P. X” and M+ INDICATOR appears
to indicate that memory contains of stored data
NOTE: “P. X” means the total number of transactions
accumulated to memory.
d. Indicator returns to normal display status after 2
seconds
e. Repeat a to c for subsequent transactions
NOTE:
- When scale is set at OIML and application is legal
for trade. User only needs to press M+ once when trying
to store a value to memory. The weight accumulation
function will take place when reading is stabled
- When scale is set at Normal and application is not
legal for trade. User can save the shown value to memory
at anytime when pressing M+
5.8.2 Memory Recall
Press MR to recall total accumulated weight from memory.
After MR is pressed, indicator displays P. X (X Means
the number of transactions accumulated) follow by a value.
The value is the total accumulated weight stored in
memory.