to SPECIFICATIONS for maximum tare range.
NOTE:
- When scale is set at OIML and application is legal
for trade. User only needs to press TARE once when tare
off a weight. The tare function will take place when
reading is stabled
- When scale is set at Normal and application is not
legal for trade. User can tare off the weight anytime
when pressing TARE
5.7 CLEAR THE TARE FUNCTION
a. Remove all loads from platter
b. The tare effect will be cancelled:
-Automatically if automatic tare function is
employed, or
-By pressing TARE
c. After TARE is pressed, the NET INDICATOR would
disappear
5.8 MEMORY FUNCTION
5.8.1 Accumulate a Transaction To Memory
a. Refer to 5.2 for weighing producers
b. Press M+ to save and accumulate data of current
To Next Page
Loading...
